English Brown Ale – Homebrew Recipe & Review

Posted on April 24, 2017 by Nick Ladd

I keep coming back to this humble English Brown Ale recipe.

If you frequently visit this blog, you’ll notice that there are certain beer styles I tend to rebrew on (at least) an annual basis. This is certainly the case with Northern English Brown. My affinity for brewing this beer mainly revolves around the fact that it is a low alcohol, sessionable, malt-forward ale that packs a lot of flavor into a fairly small package. The Maris Otter base gives an awesome bready, slightly toasty base, that is further enhanced with the addition of other melanoidin-rich specialty malts.

Another reason that I frequently rebrew this style stems from the fact that back in 2012, I managed to score a gold medal in the final round of the National Homebrew Competition with a Northern English Brown ale. Every year since, I’ve attempted to recreate that beer’s magic by rebrewing very similar recipes and entering them back into the competition. I haven’t yet been able to get this beer back into the final round, although luckily, it is still a delicious beer to have on hand. This recipe is much more toast and melanoidin-forward than what is typical for the style, but I’m still holding out hope that I’ll eventually get it back onto the medal stand.

English Brown Ale Recipe

Specifications:
Size: 3.25 gal
Efficiency: 62% (No Sparge)
Attenuation: 75%

Original Gravity: 1.051
Terminal Gravity: 1.013
Color: 17.49 SRM
Alcohol: 4.98% ABV (calculated)
Bitterness: 29.0 IBU

Malt Bill:
5 lbs. (66.7%) Crisp Maris Otter
1.5 lb. (20.0%) Weyermann Vienna Malt
8 oz. (6.7%) Crisp Crystal 77
6 oz. (5.0%) Briess Special Roast Malt
2 oz. (1.7%) Crisp Pale Chocolate Malt

Mash Profile:
149°F – 60m

Water Treatment:
Extremely Soft NYC Water
2 g. Gypsum (to mash)
4 g. Calcium Chloride (to mash)

Hopping:
28 g. East Kent Goldings (5.1% AA) – 60m

Kettle Additions:
0.5 ea. Whirlfloc Tablets (Irish moss) – 15m
0.5 tsp. Wyeast Nutrient – 10m

Yeast:
Wyeast 1469 West Yorkshire Ale

Tasting Notes:

Judged as a BJCP 13B British Brown Ale

Aroma (8/12):
Up front are medium to medium-plus esters that are quite British in their character, reminiscent of berry, cherry, and perhaps just a whisper of banana. There is a very high toasted bread crust aroma, rich in melanoidin, which has a Grape Nuts cereal character. Beyond the toast, is a bit of burnt sugar and deep toffee that almost approaches the dark fruit / raisin end of the spectrum. The nose is all about heavy malt that is not particularly delicate.

Appearance (2/3):
The beer strikes a deep brown hue with reddish and copper highlights. The beer is generally clear, but does have some light haze. The beer has a big frothy head with plenty of persistence and lacing.

Flavor (10/20):
This beer is all about big toasty malt. There isn’t much sweetness other than just a touch of dark fruit, caramel, and toffee. This is perhaps a bit out of style from the BJCP guidelines. On the finish, a very slight touch of drying roast is apparent, complemented by a bit of dark grain acidic twang. The bitterness is firm but smooth, keeping in balance with any residual sweetness. The heavy toastiness lingers through the finish becoming borderline astringent.

Mouthfeel (1/5):
The beer has a medium body with medium-plus carbonation that may be a bit out of style. The acidic tang in the flavor slightly curls the back edges of my tongue.

Overall Impression (5/10):
This beer is intensely toasty and perhaps not as caramel-rich as the style guideline would dictate.The brash toast character detracts a bit from the smoothness I’d like to see in a style intended for sessionability. This is however a very characterful beer, especially considering the ABV of less than 5%. My tasting for the beer was completed only two weeks from brewday so perhaps it will mellow out with a bit more time.

Good (27/50)

Bonus: See how judges scored this English Brown Ale at the 2017 National Homebrew Competition First Round (NYC judging center).

Irish Stout – Recipe & Review

Posted on March 17, 2017 by Nick Ladd

An early sighting of this Pour Reporter at St. James’s Gate way back in 2003.

Update 4/2/2017 – This beer placed 3rd in the first round of the National Homebrew Competition and will be moving on to the final round at Homebrew Con in Minneapolis.

Back in the day, I remember feeling a certain bravado and sense of sophistication when ordering a pint of Guinness.

It’s dark! It’s so thick! Look at the head and those bubbles!

Today I consider Guinness the bunny hill of craft beer slopes. But back then, it was GUINNESS. It was different, so much older than the American macro lager I was accustomed to. Something with flavor. Something exotic. Something authentic. In spite of the feelings I have today, Guinness will always invoke a sense of nostalgia and serve as a delicious reminder of when I first started exploring the world of beer.

Somewhat ironically, I had always thought of Guinness a filling beer, something thick. Only with age and beery wisdom, have I come to see it as something quite the opposite. A session beer that happens to have tons of flavor without imposing heavy caloric tariffs on my waste line or alcoholic ones on my liver. So in honor of St. Patrick’s day, an homage to one of my earliest beers of choice. This version has a bit more roast character, but I think it is on par in sessionability and deliciousness to the original Irish Stout.

Don’t let the snifter fool you, this is a beer built for sessionability.

Irish Stout Recipe

Specifications:
Size: 3.25 gal
Efficiency: 72%
Attenuation: 75%

Original Gravity: 1.047
Terminal Gravity: 1.012
Color: 32.8 SRM
Alcohol: 4.2% ABV (calculated)
Bitterness: 37.3 IBU

Malt Bill:
4.25 lbs. (69.4%) Crisp Maris Otter
1.0 lb. (16.3%) Briess Flaked Barley
6 oz. (6.1%) Muntons Roasted Barley
4 oz. (4.1%) Thomas Fawcett Chocolate Malt
4 oz. (4.1%) Briess Midnight Wheat

Mash Profile:
150°F – 60m

Water Treatment:
Extremely Soft NYC Water
2 g. Gypsum (to mash)
5 g. Chalk (to mash)

Hopping:
1 oz. East Kent Goldings (5.1% AA) – 60m

Kettle Additions:
0.5 ea. Whirlfloc Tablets (Irish moss) – 15m
0.5 tsp. Wyeast Nutrient – 10m

Yeast:
Wyeast 1056 American Ale

Tasting Notes:

Judged as a BJCP 15B Irish Stout

Aroma (8/12):
Moderately high aroma of roasted malts, with some complexity including notes of dry baker’s chocolate, coffee, and a touch (perhaps too much) of ashy and smoky roast. The roast is somewhat aggressive and pushes the upper end of the style limit. Beyond the roast is a very nice bready, slightly sweet malt component that is quite inviting, like baking bread. No crystal sweetness, hop character, or fermentation esters.

Appearance (3/3):
Quite black, although if you hold the edge of the glass to the light you see some very dark ruby notes. Large, soapy bubbles build a nice persistent tan head.

Flavor (17/20):
The roasted flavor is a bit less than the nose would have hinted at, but has a nice round baker’s chocolate character. The roast is quite drying on the tongue. There are some pleasant toasty malt flavors, but the beer is devoid of any sweet caramel or toffee character. There is a firm medium-plus bitterness that leaves the palate quite dry, especially when combined with the roast.

Mouthfeel (5/5):
Medium body with a nice fullness that avoids being too filling. The mouthfeel is pretty exceptional considering the low starting gravity of this beer. There is a slightly acidic tang that brightens the palate and gives the beer a bit more personality.

Overall Impression (7/10):
The is a great iteration of Irish Stout; though it pushes the upper limit of roast that I would expect in this style, especially when compared to a macro commercial example like Guinness. The roast has a slight acrid note that I’d prefer didn’t exist in the beer and probably could be eliminated by choosing a different maltster, other than Muntons for the roasted barley.

Excellent (40/50)

English Bitter Homebrew Recipe & Review

Posted on January 23, 2017 by Nick Ladd

Malty. Dry. Balanced. These are the characteristics I prize most in a well-made British session beer. I am a firm believer that the judicious use of high quality English base malts like Maris Otter will take you most of the way in achieving an interesting and nicely balanced bitter. A touch of crystal, herbal hops, and fruity yeast act as the seasoning that takes you the rest of the way.

With all the hoppy, sour, and high alcohol beers I’ve been brewing, a sessionable bitter was a great change of pace.

English Bitter Recipe

Specifications:
Size: 3.25 gal
Efficiency: 67% (measured)
Attenuation: 72% (measured)

Original Gravity: 1.048
Terminal Gravity: 1.011 (measured)
Color: 32.8 SRM
Alcohol: 4.8% ABV (calculated)
Bitterness: 14.11 IBU (does not account for IBUs created by whirlpool hop addition)

Malt Bill:
6lb (92.3%) Crisp Maris Otter
0.25lb (3.8%) Thomas Fawcett 45L Crystal Malt
0.25lb (3.8%) Bairds Crystal 130

Mash Profile:
150°F – 60m

Water Treatment:
Extremely Soft NYC Water
2g Gypsum (to mash)
2g Calcium Chloride (to mash)

Hopping:
1oz East Kent Goldings (5.7% AA) -60m
2oz East Kent Goldings ((5.7% AA) – Whirlpool 15m

Kettle Additions:
0.5ea Whirlfloc Tablets (Irish moss) – 15m
0.5tsp Wyeast Nutrient – 10m

Yeast:
Wyeast 1469 West Yorkshire Ale

Tasting Notes:

Judged as a BJCP 8B Special Bitter

Aroma (10/12):
Moderately intense fruity esters upfront that have almost an apricot and perhaps cherry character. Below this is a round toasty malt note with just a hint of caramel and toffee. The inviting nose finishes with a whisper of herbal and floral hops that have just a hint of a rose character.

Appearance (1/3):
Light copper with a noticeable haze. Head is bright white with great persistence.

Flavor (16/20):
Medium-full malt greets you with notes of freshly baked bread, toasty crust, and just a hint of deep caramel and raisin. There is a good amount of toffee as well. The hop bitterness is medium-low, enhancing an already dry finish. There is a slight mineral character on the finish.

Mouthfeel (4/5):
Medium-low body with a full creamy mouthfeel. Carbonation is medium-low and to style. There is a slight minerally astringency on the finish.

Overall Impression (8/10):
This is a beautifully balanced beer where none of the constituent ingredients feel out of place with the overall beer. The yeast character is really unique among English strains and gives the beer a delicious character not seen in many English bitters. Really nice.

Excellent (39/50)

Chuck’s Mexican AKA HBC 438 Blond Ale

Posted on January 9, 2017 by Nick Ladd

Chuck’s Mexican Blond

Way back in 2015 at the National Homebrewers Conference held in San Diego, Jason Perrault of the Hop Breeding Company (HBC), Karl Vanevehoven of Yakima Chief Hopunion (YCH), and Vinnie Cilurzo of Russian River Brewing Company gave a great talk about a new hop variety called HBC-438. The hop is lovingly referred to as Chuck’s Mexican, having originated from Chuck Zimmerman, a breeder at the USDA, and sharing a genetic lineage to neomexicanus, a wild hop found in the southwestern United States. The history of how this hop has made its way into homebrewer’s kettles is fascinating and can be read here. Origin story aside, what intrigued me the most about the hop was its relatively high alpha acid (14-18%) and high oil contents (2.5-3.5 ml/100g). Additionally, I love the idea of using a hop with at least some of its lineage tied to the Americas.

At the conference, I was given a couple ounces of the hop which lived in the back of my freezer until nearly a year later when I got around to brewing with them. I was a little concerned about the freshness of the hops, but decided to go ahead and give them a shot in a single hop beer. Opening the vacuum sealed bags, there was no detectable cheesiness or other off-aromas so I was optimistic that the brew would turn out well.

Chuck’s Mexican Blond Ale Recipe

Specifications:
Size: 3.25 gal
Efficiency: 66%
Attenuation: 76%

Original Gravity: 1.050
Terminal Gravity: 1.012
Color: 7.82 SRM
Alcohol: 4.98% ABV
Bitterness: 0 IBUs (does not account for whirlpool addition hop isomerization)

Malt Bill:
6 lbs (83.1%) Weyermann Pilsner Malt
6.5 oz (5.6%) Briess Victory Malt
6.5 oz. (5.6%) Weyermann Rye Malt
6.5 oz. (5.6%) Rahr White Wheat Malt

Mash Profile:
152°F – 60m
170°F – 5m

Water Treatment:
Extremely Soft NYC Water
4g Gypsum (to mash)
2g Calcium Chloride (to mash)

Kettle Additions:
0.5ea Whirlfloc Tablets (Irish moss) – 15m
0.5tsp Wyeast Nutrient – 10m

Whirlpool Hopping:
2 oz. HBC-438 (16.6% AA) – 20m

Yeast:
Wyeast 2565 Kölsch

Tasting Notes:

Judged as 2015 BJCP Category 18B American Pale Ale

Aroma (5/12):
The beer has a medium to medium-high fruity character that seems to be equal parts hop and expressive yeast. There is a moderate berry character—maybe blackberry as well as some overripe, almost rotten mango notes. The yeast is slightly sulfury / eggy, which may dissipate with some extended cold storage. There is a weird, almost savory / herbal note that seems to be hop-derived. In the background are some nice toasty / biscuity malt aromas.

Appearance (3/3):
Deep gold with good clarity. Just a touch of light haze. The beer is capped with a big fluffy white head that shows excellent persistence.

Flavor (9/20):
Medium to low malt sweetness upfront with some great toasty malt flavors. The beer is a touch oversweet and could benefit from some more hop bitterness. There is a touch of mineral / seltzer water character on the finish. Again, there is a bit of a weird herbal / savory hop flavor that my palate doesn’t enjoy.

Mouthfeel (5/5):
Medium body with a great roundness / silkiness provided by the rye. Medium to medium-low carbonation. Very pleasant.

Overall Impression (4/10):
I’m pretty surprised at how hoppy this beer is considering the low hopping rate and age of the hops. I can say unequivocally that HBC-438 has a very unique profile. Unfortunately, for me, it contributes an unwelcome melange of overripe berries and savory herbs, which don’t quite jive with my tastes.

Good (26/50)

Tropical Corn IPA – Recipe and Review

Posted on November 29, 2016 by Nick Ladd

Tropical to the max, not so sexy in the glass.

If you’ve followed the various IPA recipe posts on this site, you’ll know that my IPA preferences lean towards increasingly lower levels of malt while pushing hop flavor and aromatics towards absurdity. A big part of this rational is that I honestly believe IPA is at its best when it becomes a pure expression of hops. “Balance”, an often proselytized descriptor among beer geeks, is becoming increasingly meaningless to me, especially when applied to contemporary American IPAs. At the risk of sounding irreverent, finding “balance” in a beer, often defined as the counterbalance between competing forces (malt sweetness vs. hop bitterness vs. acidity, etc.) should not be sought in IPA. Instead, creating as light of a body as possible while providing enough sneaky alcohol to both extract the hop goodness and leave you feeling immersed in a hop halo is a priority. While hop choices and technique are fundamental (and often the focus of recipe creation), providing the right malt canvas for alcohol creation should be equally as important.

It is in the realm of creating minimally flavored alcoholic liquids that I think we can learn from our distant brewing cousins from the world of industrial lager. Frequently, corn or rice is used as a medium for creating highly fermentable worts with very little residual body or sweetness. Craft brewers often use refined dextrose in their beers. For this beer, I thought it would be fun to introduce both the refined product (dextrose) and its pre-gelatinized source material (flaked corn) into an IPA recipe and see if I could push further, the lean body I am looking for.

Tropical Corn IPA Recipe

Specifications:
Size: 3.25 gal
Efficiency: 77%
Attenuation: 82.7%

Original Gravity: 1.060
Terminal Gravity: 1.010
Color: 3.15 SRM
Alcohol: 6.56% ABV
Bitterness: 50.7 IBUs

Malt Bill:
5 lbs (70.8%) Weyermann Pilsner Malt
1.25 lbs (17.7%) Briess Flaked Corn
13 oz. (11.5%) Corn Sugar

Mash Profile:
149°F – 60m
170°F – 5m

Water Treatment:
Extremely Soft NYC Water
4g Gypsum (to mash)
2g Calcium Chloride (to mash)

Hopping:
15g Warrior (17.9% AA) – 90m

Kettle Additions:
0.5ea Whirlfloc Tablets (Irish moss) – 15m
0.5tsp Wyeast Nutrient – 10m

Whirlpool Hopping:
34g El Dorado (13.2% AA) – 20m
68g Galaxy (16.1% AA) – 20m

Yeast:
Wyeast 1056 American Ale

Dry Hopping:
34g Azacca (10.3% AA) – 2 Days
100g Galaxy (16.1% AA) – 2 Days

Tasting Notes:

Judged as 2015 BJCP Category 21A American IPA

Aroma (8/12):
Bright tangerine, ripe mango, honeydew melon, and pineapple leap from the glass accompanied by a touch of lemon, grapefruit pith, and light pine resin. Fruit salad in a glass. There is a very subtle, bready malt note hiding somewhere in the background. There is almost no malt at all—just a lot of punchy hops. As it warms, some ethanol heat is apparent.

Appearance (1/3):
Very hazy, bordering on murky. Big white head with awesome, super clingy white foam that persists.

Flavor (13/20):
Super juicy hop punch flavor. Lots of tropical aromatics—mango, melon, pineapple, and some grass. The beer has a firm hop bitterness that I find refreshing in comparison to many underbittered, nouveau IPAs. There is a pretty obvious alcoholic heat that is not pleasant. The beer is very dry, but there is some implied sweetness derived from the mind’s association between the fruity hop flavors and their real world counterparts. Malt really has no role in the flavor composition, except perhaps in lending just a deft touch of soft breadiness to the finish.

Mouthfeel (3/5):
Medium to medium-low body. Carbonation is slightly low. The body has a softness that I often associate with heavily hopped beers packed with hop oils.

Overall Impression (7/10):
This beer is an excellent showcase for newer tropical hop varieties. Time will tell whether these flavors stand on their own merits or if they’re simply novel. I think it’s the latter. The hops are allowed to shine in this almost austere beer; although, finding a way to temper the alcoholic heat is vital for this to really be a fantastic beer.

Very Good (32/50)