Honey | Orange Pale Ale – Recipe and Review

Posted on March 22, 2015 by Nick Ladd

Synergy between ingredients is something that I often seek out when writing a new beer recipe. In this particular case, I started with the premise of wanting to use orange blossom honey in a beer. Orange blossom honey has a delicate orange flavor as well a soft floral honey bouquet. Building a beer recipe around these attributes, I started with a Belgian Pilsner malt base which I’ve found to produce a honey like sweetness in my beers. From there, the base malt was accented with a small amount of Gambrinus honey malt to emphasize the honey character. Additionally, I delicately hopped the beer with Mandarian Bavaria hops which I’ve found to have a pronounced sweet orange (not pith) character that would be delicate enough not to overpower the honey.

Honey | Orange Pale Ale Recipe

Specifications:
Size: 3.75 gal
Efficiency: 68%
Attenuation: 80%

Original Gravity: 1.050 SG
Terminal Gravity: 1.010 SG
Color: 6.07 SRM
Alcohol: 5.28% ABV
Bitterness: 20.3 IBU

Malt Bill:
5.5 lb (72.1%) Pilsner Malt (Dingemans)
0.75 lb (9.8%) Munich TYPE I – (Weyermann)
6 oz (4.9%) Honey Malt – (Gambinus)

Mash Profile:
146 °F – 60m
168 °F – 5m

Water Treatment:
Extremely Soft NYC Water
2g Gypsum (to mash)
4g Calcium Chloride (to mash)

Hopping:
16 g Mandarina Bavaria (7.2%) – 90 m

Note: After boil was complete, the kettle was topped up with cold water to lower temperature to 180°F.

2 oz (43.8%) Mandarina Bavaria – 180°F Steep – 15 m
1 lb (13.1%) Orange Blossum Honey – 180°F Steep – 15 m

2 oz (43.8%) Amarillo® – Hop Back (Blichmann Hop Rocket)

Kettle Additions:
0.5 ea Whirlfloc Tablets (Irish moss) – 15m
0.5 tsp Wyeast Nutrient – 10 m

Yeast:
WYeast 1056 American Ale™- Starter on stirplate to achieve 1 million cells per milliliter of wort per degree Plato. Use Mr. Malty to determine proper starter sized based on age of yeast package. Pitch into 60°F wort and allow to free rise to 64°F. As fermentation begins to slow, raise temperature to 70°F.

Tasting Notes:

Judged as a BJCP Category 23 Specialty Beer

Aroma (10/12):
Low to moderate floral honey notes. There is a medium to medium-high sweet citrus / orange / tangerine hop aroma. Some soft candy-like malt sweetness is in the background. No alcohol, DMS, or diacetyl. The is a touch of grassy hops in the background.

Appearance (2/3):
Color falls somewhere between a light copper and a deep blond. There is a slight haze to the beer. Fluffy white persistent head.

Flavor (17/20):
Moderately high hop flavor that is like sweet or candied orange. None of the pithy bitter citrus flavors that are often associated with traditional types of citrus hops. Honey is strongly present and quite floral. Malt is soft and bready with a light crackery character. The hop bitterness is medium-low and leaves behind just a hint of malt sweetness. There is a wonderful honey flavor that persists through the finish.

Mouthfeel (3/5):
Crisp with a medium to medium-low body. Quite balanced. No astringency. Beer has a medium-high carbonation which is slightly biting.

Overall Impression (8/10):
This is a very nice balanced pale ale that showcases the honey content. The beer is exceptionally balanced with layer of flavors; none of which stick out or feel out of place. Very well crafted beer.

Excellent (40/50)

Triple IPA Brewday & Review

Posted on January 8, 2015 by Nick Ladd

Take a ridiculously hoppy double IPA, increase the hopping and alcohol to ludicrous levels, and you have a decent outline for crafting a triple IPA. These are fun beers to brew, and a great way to use up any extraneously hops that may be buried in your freezer. This beer is very much in the same spirit as coveted beers like Pliny the Younger (you can read more about my club’s attempt at cloning the Younger, here).

This is a tough beer to brew as it can easily fall victim to common faults. The most frequent and egregious fault with American-style IPAs is not achieving adequate levels of attenuation. Nothing ruins a big hoppy beer’s drinkability quicker than excessive residual gravity or caramel flavors. This is even more apparent when you’re pushing the beer to triple IPA levels. Controlling fermentability with the addition of simple sugars and low mash temps will take you most of the way. From there, it is key to pitch a big healthy population of yeast, adequately oxygenate the wort, and carefully control fermentation to keep higher alcohols in check.

The second most common fault would likely be harsh or grassy hop flavors. This most commonly occurs when brewers leave dryhops in contact with the beer for excessive periods. Many sources cite the fact that the majority of hop oils are extracted within the first 24-48 hours of contact with our beer. Anecdotally, I’ve definitely experienced this and typically now only leave dry hops in contact with my beers for 2-3 days, maximum.

Lastly, it is extremely important to limit oxygen pickup post fermentation with your hoppy beers. Hop compounds are extremely susceptible to oxidation. Very few factors will contribute to the destruction of a hoppy beer quicker than oxygen. Purging vessels, pushing beer with C02 in closed loops, and cold storage can greatly increase the shelf-life of your hoppy beers.

Triple Tap Triple IPA Recipe

Specifications:
Size: 4.5 gal
Efficiency: 67%
Attenuation: 92%

Original Gravity: 1.088 SG
Terminal Gravity: 1.007 SG
Color: 8.3 SRM
Alcohol: 10.65% ABV
Bitterness: 55.7 IBUs (Doesn’t account for substantial bitterness achieved with whirlpool additions)

Malt Bill:
12 lb (76.2%) Pilsner Malt (Weyermann)
1 lb (6.3%) Munich TYPE II (Weyermann)
.25 lb (1.6%) Caramalt 15 (Bairds)

Mash Profile:
147 °F – 60m
154 °F – 10m
168 °F – 5m

Water Treatment:
Extremely Soft NYC Water
6g Gypsum (to mash)
3g Calcium Chloride (to mash)

Hopping:
0.25 oz Centennial (10.5%) – 60 m
1 oz Centennial (10.5%) – 20 m
1 oz Amarillo® (8.7%) – 20 m

2 oz Citra™ (13.7%) – Whirlpool 20m
1 oz Amarillo® (8.7%) – Whirlpool 20m
2.5 oz Mandarina Bavaria (7.2%) – Whirlpool 20m

2.5 oz (17.5%) Amarillo® – Hop Back (Blichmann Hop Rocket)

2 oz Galaxy (14.0%) – Dry Hop @ Room Temp 3 Days
2 oz Citra™ (12.0%) – Dry Hop @ Room Temp 3 Days

Kettle Additions:
2.5 lb (15.9%) Corn Sugar – 15m
0.5 ea Whirlfloc Tablets (Irish moss) – 15m
0.5 tsp Wyeast Nutrient – 10 m

Yeast:
WYeast 1056 American Ale™ – Large starter on stirplate to achieve 1 million cells per milliliter of wort per degree Plato. Use Mr. Malty to determine proper starter sized based on age of yeast package. Pitch into 60°F wort and allow to free rise to 64°F. As fermentation begins to slow, raise temperature to 70°F.

Tasting Notes:

Judged as a BJCP Category 23 Specialty Beer

Aroma (10/12):
Huge, punchy hop-nose. The hops are extremely juicy and tropical — reminiscent of mango, orange, and pineapple. In many ways, this beer reminds me P.O.G. (passion fruit, orange, guave) juice. There is a moderate amount of grassy, plant-like aromas. By and large the hops are almost uniformly fruity with very little pine or resinous aromas. Malt character is slightly bready. No alcohol, DMS, or diacetyl are perceptible.

Appearance (1/3):
Beer pours a muddy copper color. Extremely hazy with hop compounds. Beer is capped with a bright white, thick, persistent head.

Flavor (10/20):
Taking a swig from the tasting glass fills your mouth with huge, round, hop flavors. The flavors are very fruity and tropical, although there is a slightly biting, resinous, bitterness on the finish. There is a bit of residual sweetness that keeps the beer feeling slightly full and heavier than I would like. As the beer warms, some warming alcohol dances across the palate.

Mouthfeel (3/5):
Medium body and carbonation. Some light hop astringency is present on the finish and detracts from the overall drinking experience. The hops seem to lend a creamy texture to the mouthfeel.

Overall Impression (6/10):
This beer pushes the level of hoppiness that I am able to enjoy almost to the breaking point. The beer is young and brash with bold assertive flavors that come off a touch green. It is very much in the same vein as beers like Pliny the Younger, which are best enjoyed in small glasses and shared with friends.

Very Good (31/50)

Hoppy Rye Saison with Brett Trois – Recipe and Review

Posted on December 29, 2014 by Nick Ladd

More and more I’m beginning to think that there is real potential to create delicious beers by exploiting the synergies that can take place between fruity American hops, and fruity yeast strains. To achieve this end, it is important to select the appropriate hop varieties that lean more towards the fruity/tropical rather than pine/resin end of the flavor spectrum. To further investigate these possibilities, I decided to brew up a super hoppy saison that would be complemented by the pleasant fruitiness provided by the Dupont saison yeast and intense tropical esters provided by Brettanomyces Trois (which may or may not actually be a Brettanomyces strain). Additionally, my goal in pitching a Brett strain along with the traditional Dupont strain would be to allow the Brett to finish up the ferment where the Dupont yeast typically stalls out.

Hoppy Rye Saison with Brett Trois

Recipe Specs:
Size: 3.31 gal
Efficiency: 70%
Attenuation: 84%

Original Gravity: 1.050
Terminal Gravity: 1.008
Color: 3.87 SRM
Alcohol: 5.5% ABV
Bitterness: 30.6 IBU
Mash Temp: 144°F 90 min., 154°F 10 min.

Grain Bill:
5.75 lb (79.3%) Weyermann Pilsner Malt
.75 lb (10.3%) Weyermann Rye Malt
.75 lb (10.3%) Briess Flaked Rye

Hopping:
0.75 oz Mandarina Bavaria (7.2% AA) – 90 m

1 oz Citra™ (13.7% AA) – 180 degree hop stand – 20 m
2 oz Mandarina Bavaria (7.2% AA) – 180 degree hop stand – 20 m
1 oz Centennial (10.5% AA) – 180 degree hop stand – 20 m

2 oz Amarillo® (8.5% AA) – Hop Back

1 oz Mandarina Bavaria (7.2% AA) – Dry Hop 3 Days
1 oz Citra™ (13.7% AA) – Dry Hop 3 Days

Kettle Additions:
0.5 ea Whirlfloc Tablets (Irish moss) – 15 m
0.5 tsp Wyeast Nutrient – 10 m

Yeast:
WYeast 3724 Belgian Saison™ – Added to 2 gallons of wort
White Labs WLP644 Brettanomyces Trois – Added to 1 gallon of wort

The Saison strain and Brett strain were pitched on brew day into two separate fermentation vessels. Once the Saison yeast stalled (typical of this strain), the two fermenters were combined and allowed to co-ferment.

Water Treatment:
Soft NYC municipal water with 3g Gypsum and 2g Calcium Chloride added to the mash.

Tasting Notes:

Judged as a BJCP Category 16E Belgian Specialty Ale

Aroma (11/12):
Initially there is a big hit of meyer lemon-like fruit up front, followed by a massive amount of tropical fruit. The beer is almost reminiscent of POG (Passion Orange Guava) juice. Very bright and refreshing aroma. The impression of fruitiness is huge, but it is unclear where the hops and yeast character begin and end. A great melding of aroma compounds. Malt is soft and bready. No grassiness, alcohol heat, or other off-aromas. Just a hint of pepper — not as much as you’d find in a typical saison.

Appearance (1/3):
Murky gold. The hop haze and high-protein rye have produced a very muddy beer. Glass is capped with a nice persistent white foam.

Flavor (16/20):
Huge tropical notes fill the pallet. Very delicious and refreshing. Low amounts of pepper-like phenols are present and add to the beer’s dry impression. The base malt is in the background and nondescript. The rye is evident and provides a spicy kick. The overall impression of dryness is very high and gives a great refreshing impression. The is a firm hop bitterness that is high for style, but works well in this beer.

Mouthfeel (5/5):
This is where the rye really shines. The beer has an immensely pleasurable silky mouthfeel that prevents a dry beer like this from feeling too austere. The silky body balances well against a prickly level of carbonation.

Overall Impression (9/10):
This is a fantastic, refreshing, and complex beer. In many ways, it feel more like a Belgian IPA than saison due to the immense hop aroma and flavor. The synergies that are happening between the potent hopping and yeast derived compounds work well. It will be interesting to see where this beer goes as the hops begin to fade and the yeast derived flavors come more to the foreground.

Excellent (42/50)

Session Ale – Thoughts, Recipe, and Review

Posted on October 11, 2014 by Nick Ladd

The original brewdog Zeus pondering the sessionabilty of my beer.

There is a lot of debate in the beer world about what exactly defines a true session beer. Alcohol levels typically weigh heavily in the debate. Alcohol is a quantifiable variable with very specific implications, especially as it relates to the length of a drinking session. The specifics off what ABV is truly considered ‘sessionable’ makes for a fun debate, but is one that I’ll defer to the experts. For the Brits, frequent pub visits are an important part of daily life and culture. Taking queue from the ordinary bitters that frequently flow in pubs across the Isles, I’d suggest that a true session beer should be kept somewhere in the range of 3.0-3.5% ABV. Whether these levels were consciously set, or simply a by-product of the taxes imposed upon beer, the effect is clear. This level of alcohol strikes a good balance between the pleasant alcohol induced euphoria beer can produce (AKA a buzz) and running the risk of prematurely ending a drinking session in a drunken stupor. Until a couple of years ago, it was difficult to find a beer this low in alcohol at American brewpubs. Luckily, a trend towards more moderate alcohol levels has taken root, and homebrewers are able to find numerous wonderful examples of commercial session beers.

Aside from alcohol content, there are other very important factors which improve a beer’s sessionability. To me, session beers should be relatively dry in order to prevent too much fullness. That said, low-gravity beers can easily become watery or tea-like if the gravity drops too low. There is a hugely important distinction that must be understood when formulating a session beer, and that is the difference between sweetness and body. A beer can be round with a medium body and moderate amount of residual gravity without tasting sweet. The key is making sure that all fermentable sugars have been consumed by the yeast and that the gravity that remains are dextrins which provide ample body without perceivable sweetness. Balance is the key.

Another important factor in sessionablity is flavor and complexity. Session beers should be complex enough to remain interesting, while not overburdening your palate. The Brits do this well with the bready malt components and nuanced yeast character found in their bitters. Personally for me, the same end result can be accomplished using hops. There is something amazing about drinking a beer with the balance and hop intensity of some of the bigger more intense American Pale ales while doing so at a more moderate ABV.

Single Hop Huell Melon Session Pale Ale

Recipe Specs:
Size: 3.23 gal
Efficiency: 68%
Attenuation: 64%

Original Gravity: 1.043
Terminal Gravity: 1.015
Color: 8.25 SRM
Alcohol: 3.53% ABV
Bitterness: 39.5 IBUs
Mash Temp: 159 °F

Grain Bill:
4.75 lb (79.2%) Weyermann Pilsner Malt
.25 lb (4.2%) Briess Victory® Malt
.25 lb (4.2%) Weyermann Pale Wheat Malt
.5 lb (8.3%) Weyermann Carahell®
.25 lb (4.2%) Weyermann Carared®

Hopping:
0.75 oz Huell Melon (5.2% AA) – 60 m
1 oz Huell Melon (5.2% AA) – 20 m

3 oz Huell Melon – 180 degree hop stand (5.2% AA) – 20 m

2 oz Huell Melon (5.2% AA) – Dry Hop 3 Days

Kettle Additions:
0.5 ea Whirlfloc Tablets (Irish moss) – 15 m
0.5 tsp Wyeast Nutrient – 10 m

Yeast:
WYeast 1056 American Ale™ – Build appropriately sized starter
Pitch yeast once beer is at 62°F. Keep beer at 64°F during the start and peak of fermentation. Slowly raise to 70°F as signs of fermentation taper off.

Water Treatment:
Soft NYC municipal water with 2g Gypsum and 4g Calcium Chloride added to the mash.

Tasting Notes:

Judged as a BJCP Category 23 Specialty Beer

Aroma (7/12):
While not as much melon as I had anticipated given the hop’s name, there is a nice round fruity hoppy character on the nose. The fruitiness is somewhat non-descript, although it is definitely not the typical citrus found in American hops. If I really search, I can convince myself there is some honeydew-like melon aromas, but it is a stretch. The hops have a touch of grassiness which isn’t offensive. The malt is really nice. It is soft with a hint of sweetness complemented by biscuit and sourdough bread.

Appearance (2/3):
The beer is a rich golden color bordering on copper with a touch of haze. The glass is capped with a white, fluffy, persistent head.

Flavor (17/20):
The hops are much more subdued in the flavor than the aroma. The malt is wonderful. Lots of toast and biscuit. The bitterness is firm and balancing, while being quite clean. The beer goes through a great procession on the palate with malt up front, then some juicy hops, and ending with a toasty malt finish.

Mouthfeel (5/5):
Beer is medium to medium-low bodied. The mouthfeel exceeds what I would have expected given the low starting gravity. Soft carbonation enhances this impression. No perceptible alcohol heat.

Overall Impression (10/10):
This is a really crushable session beer that exceeds my expectations. The new German hop variety used is pretty tame, and much more nuanced than other varieties being grown in the New World. All in all, the beer hits all the right chords in terms of what I search for in a session beer. Wonderful beer.

Excellent (41/50)

Funky Tap – Brett Trois IPA

Posted on September 25, 2014 by Nick Ladd

The last batch of Single Tap IPA I brewed ended up producing an extra gallon of wort that wouldn’t fit into my fermenter. Rather than toss the excess, I racked it to a 1-gallon glass jug and fermented it out with standard WYeast 1056 American Ale yeast before inoculating it with a secondary Brettanomyces Trois strain (White Labs WLP644). There has been quite a few commercial brewers producing Brett IPAs, especially using Brett Trois, and there seems to be some pretty nice flavor synergies between hops and this particular Brett strain.

Tasting Notes:

Judged as a BJCP Category 23 Specialty Beer

Aroma (5/12):
The are some obvious Brett aromas coming from this beer. Esters smell almost like over-ripe pineapple and blend nicely with the potent citrusy / mango-like American hops jumping from the glass. The synergies between yeast and hop derived aromas is quite evident. The Brett has a low phenolic component that is both peppery and features a low amount of plastic-like aroma which feels a bit out of place. There is a slightly skunky / light-struck component to the aroma which is off. A low, honey-like component to the malt makes me think the beer may be slightly oxidized.

Appearance (3/3):
Medium copper and clear. This beer has dropped quite bright with a bit of age and cold conditioning. Persistent white fluffy head.

Flavor (11/20):
Lots of round citrusy/fruity hops. I’m a bit surprised how hoppy this is given the age and lack of dry hopping. It is tough to tell where the Brett derived flavors and hops begin and end, but the sum of the parts is quite nice and juicy. Malt is soft, bready, and round, but a bit oxidized. Bitterness is gentle, but balancing.

Mouthfeel (5/5):
Dry yet round. Somewhat of a paradox, but the mouthfeel sensation is quite pleasant.

Overall Impression (5/10):
This is a pretty nice beer and dramatically different than the non-Brett version. The melding of Brett flavors and hops works quite well. The only exception being the hint of pepper/plastic phenol which is a bit clashing. Additionally, the skunky aroma and oxidation stick out like a sore thumb to my pallet. This beer was a bit of a bastardized experiment generated by leftover wort. My normal process and care in transferring and storing the beer were not followed, and appear to have resulted in some off-flavors. Regardless, this beer really does illustrate the synergies that can take place between Brett derived esters and hop character.

Good (29/50)