Bourbon County Brand Barleywine Review

Posted on December 15, 2013 by Nick Ladd

‘Tis the season for Goose Island’s annual release of their Bourbon County line of beers. With this year’s release, the product line has grown to include a barrel-aged English-style barleywine in addition to their very tasty imperial stout offerings. Beer geeks around the country are giddy at the thought that this beer could be of the same lineage as King Henry — many a beer geek’s White Whale. It’s been over a year since I’ve sampled King Henry, but if my memory serves me correctly, this is a relatively similar beer.

Beer Data:

Purchased: 12/5/13 – $24.99 per 12 oz. 4-pack
Availability: Annually
Alcohol: 12.1% ABV

Commercial Description from Website:

Aged in the third-use barrels that were once home to Kentucky bourbon and then our renowned Bourbon County Stout, this traditional English-style barleywine possesses the subtlety of flavor that only comes from a barrel that’s gone through many seasons of ritual care. The intricacies of the previous barrel denizens – oak, charcoal, hints of tobacco and vanilla, and that signature bourbon heat – are all present in this beer. Hearty and complex, Bourbon County Brand Barleywine is a titan and a timeline; a bold, flavorful journey through the craft of barrel aging.

Tasting Notes:

Reviewed as a BJCP Category 22C. Wood-Aged Beer (English Barleywine base).

Aroma: (10/12)
Lots of big, sticky malt dominates the aroma. Most apparent on the malt side is a rich and luscious deep caramel as well as some molasses. There is a ton of pleasant oxidized malt character reminiscent of dark fruit and tart cherry — likely a consequence of the micro-oxidation that occurred while in the barrel. There is a surprisingly light oak character that has hints of vanilla and toasted coconut, which blend well with the base beer. Some hot alcohol is apparent, but it is minimal considering the high ABV. No hop aroma.

Appearance: (2/3)
Very deep mahogany — almost black. The beer is clear with a minimal tan head. This is an attractive beer, but a few shades too dark for the style.

Flavor: (16/20)
There is a richness to the malt that fills the palate with flavors of dark caramel upfront and toasty biscuit and bread crust on the back end. Again, there is lots of oxidized malt that comes off as raisin-like in the flavor. There is some definite boozy hot alcohol, which actually helps balance the heavy-handed malt sweetness. The hop bitterness is barely enough to balance the large amount of sweet malt. The bourbon flavor is definitely present, but not nearly as intense as other beers in the Bourbon County line.

Mouth Feel: (2/3)
“Chewy” is a fitting description of the mouthfeel. The beer is slightly slick and leaves the mouth a bit tacky and sticky. The carbonation is very soft, which serves to enhance the full-bodied nature of this beer. The beer is a bit syrupy on the finish, which detracts from the overall impression of the beer.

Overall Impression: (8/10)
This is a big and intensely complex malt-bomb. If that’s what you’re in the mood for, this beer will greatly exceed your expectations. A touch more attenuation seems like it would help the beer out in terms of drinkability (if there is such a thing for a 12.1% beer). There are some prominent oxidized notes in this beer that are pleasant, but not something I’d want to enhance by aging the beer any further. This would work well as a dessert beer or replacement for something like a Sauternes paired with a Roquefort cheese.

Score: 38 / 50 (Excellent)

Double Dose IPA Review – Otter Creek / Lawson’s

Posted on November 5, 2013 by Nick Ladd

Last spring, I serendipitously had the chance to try Lawson’s Finest Double Sunshine while on a beer pilgrimage up to Vermont. Sitting on the sunny deck of The Reservoir in downtown Waterbury, the stars aligned — by pure luck, I happened to be seated for lunch at the very time that Double Sunshine was being tapped. In this case, the perfect atmosphere, company, and beer aligned to build a wonderful experience greatly exceeding the sum of its parts. The beer was absolutely fantastic and ever since I’ve been eager to try another of Lawson’s hoppy offerings.

Luckily Lawson’s Finest has teamed up with Otter Creek Brewing to produce a collaborative IPA called Double Dose. Thanks to Otter Creek’s distribution capabilities, a good amount of this beer made its way down to NYC and I was able to get a 4-pack.

Beer Tasting

Judged as a BJCP Category 14B American IPA.

Aroma (8/12)
Big in-your-face hops hit you as soon as your face nears the glass. Tangerine, pithy grapefruit zest, a very light hint of pine resin, and a substantial amount of ripe mango dominate. The intensity of the hops is quite high, but in many ways feel a bit muddled. There is just a hint of malt aroma. Some hot alcohol is apparent.

Appearance (2/3)
Very muddy and hazy. The beer paints a golden hue, which turns somewhat brown due to all the suspended solids. Head is bright white and persistent with tight creamy bubbles.

Flavor (13/20)
Citrus fruit dominates the flavor with a touch of pine sap. There is some very light crackery malt and maybe just a touch of sweet caramel. The bitterness is fairly moderate at first, but transforms into a fairly coarse and abrasive bite on the finish. The finish is further disturbed by a fairly substantial amount of hot alcohol.

Mouthfeel (4/5)
The beer is medium to medium-full bodied with a very distinct creaminess that is very reminiscent of Heady Topper to me. The beer finishes too full to fit well stylistically into the IPA category.

Overall Impression (7/10)
This is a nice example of an IPA that pushes, and likely exceeds the bounds of what most people would consider a standard IPA. I would be much more inclined to call this a double or imperial IPA. I enjoyed the hop intensity, but couldn’t help but think that the recipe could benefit from some hop varietal editing in order to allow individual flavors to pop on their own. Additionally, I found the amount of very apparent alcohol a bit overwhelming. I enjoyed this beer, but not nearly as much as my last Lawson’s experience.

Total: 34/50 (Very Good)

Pumpkin Homebrew Tasting

Posted on October 26, 2013 by Nick Ladd

Six weeks have passed since I brewed my high gravity pumpkin ale. The base recipe for the beer was an English Barley Wine on the low end of the style category. The original gravity started at 1.077 and finished at 1.017, giving me an approximately 8% ABV beer.

My goal with this beer was to take take the pie crust malt character found in many commercial pumpkin beers and amplify it, while decreasing the spice intensity. Additionally, I really wanted to make a beer where you could actually taste the caramelized pumpkin that was added to the mash.

Beer Tasting

Judged as a BJCP Category 21A Spice / Herb / Vegetable Beer.

Aroma (10/12)
Big round malt on the nose that is quite full with lots of deep caramel, toffee, and a hint of honey. There is a definite vanilla aroma as well as some oakey bourbon. The spicing is quite low with cinnamon being the most readily apparent, along with some nutmeg that instantly combines with some of the whiskey aromas to become reminiscent of eggnog. There are some pumpkin aromas that come off as cooked squash. As the beer warms, there is a hint of alcohol heat and acetone.

Appearance (3/3)
The beer is a beautiful deep amber or garnet with reddish highlights. The beer is clear, but not brilliantly so. The head is off-white and persistent.

Flavor (10/20)
There are some intense crackery and biscuit malt flavors upfront that are a little more substantial than I would have liked. There is no hop flavor although the beer has a nice firm balancing bitterness. Caramel hits mid palate and gives an impression of sweetness. It feels like the melanoidin rich malt is combining with the spice and alcohol to give a somewhat harsh flavor on the finish. There is a earthy gourd-like flavor that reminds you that you’re drinking a beer brewed with a substantial amount of pumpkin.

Mouthfeel (3/5)
The beer is quite full, perhaps a bit too much. The carbonation is low, further enhancing the beer’s fullness and leaving the mouthfeel a touch flabby.

Overall Impression (5/10)
This is not a bad beer, but I wouldn’t say it is world-class either. The slight harshness from the very intense toasty flavors are a bit much and could be dialed down a bit. Additionally, the whiskey and vanilla notes, while interesting, could benefit from some restraint. The presence of actual pumpkin in the beer is very apparent and quite welcome. It is quite likely that the beer will mellow out and become much more enjoyable with some age.

Total: 31/50 (Very Good)

Firestone Walker Parabola Clone Attempt

Posted on October 13, 2013 by Nick Ladd

My Parabola clone fermenting side-by-side my King Henry clone.

My Parabola clone explosively fermenting away.

One of the greatest things about homebrewing is that it enables you to dissect commercial beers and make your own attempts at brewing beers of a similar nature. Precise replication is rare, even when you’re working from a proven recipe, but the exercise in itself is enjoyable, and the beers typically turn out quite tasty.

Back in 2011, I was inspired to take a shot at cloning Firestone Walker’s Parabola, and posted a quickly cobbled together recipe on HomebrewTalk. Now, a couple years later I’ve finally gotten around to taking a shot at it.

The recipe below was put together while carefully tasting the commercial beer and reading through the information published on both bottles of Parabola and on Firestone Walker’s website. The information that is out there indicates a very complex malt bill; something that makes determining the precise percentages of each malt somewhat of a shot in the dark. That being said, I’ve based the recipe on typical uses of those grains and what I’ve been able to taste in the commercial beer. The actual brewday was quite uneventful, and the beer is happily fermenting away. My plan is to transfer it onto oak in secondary and to let it rest until next April, which happens to coincide with the annual commercial release of Parabola. Stay tuned for future posts reviewing the beer and indicating how close this recipe replicates the commercial beer.

Recipe:

Size: 2.74 gal
Efficiency: 60%
Attenuation: 73.0%

Original Gravity: 1.127 SG
Terminal Gravity: 1.034 SG (projected)
Color: 53.12 SRM
Alcohol: 12.42% ABV
Bitterness: 79.6 IBUs

Ingredients:
10.5 lb (64.1%) Maris Otter (Crisp)
1.75 lb (10.7%) Munich TYPE II (Weyermann)
14 oz (5.3%) Chocolate (Crisp)
8 oz (3.1%) Roast Barley (Crisp)
8 oz (3.1%) Carafa Special® TYPE III (Weyermann)
12 oz (4.6%) Flaked Oats (Briess)
8 oz (3.1%) Carahell® (Weyermann)
8 oz (3.1%) Crystal 120 (Crisp)
8 oz (3.1%) Crystal 45 (Crisp)

22 g Columbus (15.0% AA) – boiled 60 m
1/2 tablet Whirlfloc – boiled 15 m
0.5 tsp Wyeast Nutrient – boiled 10 m
1 oz Hallertauer Hersbrucker (4.5% AA) – Whirlpool Rest 15m

Fermentis Safale US-05

Mash:
148 °F – 60m
170.0 °F – 10m

Fermentation:
1. Chill to 62°F and keep at 64°F until activity slows
2. Raise temp to 72°F 3 days
3. Crash to 32°F 3 days

Secondary:
Split into 1-gallon vessels with oak soaked in bourbon.

Vessel 1: 0.25 oz. American Heavy Toast + 2oz. Larceny Wheated Bourbon
Vessel 2: 0.25 oz. American Heavy Toast + 2oz. Rittenhouse Rye 101

Update:

The beer has unfortunately stopped fermenting at 1.044. The taste is quite nice and is by no means cloying. The high gravity however makes me slightly nervous as my eventual plan is to bottle condition the beer. I pulled a sample and preformed a force ferment test on it. The force ferment test confirms that there is no residual fermentable sugars left in the beer. Next round, I will likely lower the mash temperature and decrease the crystal malts to achieve a more fermentable wort. In the mean time, this beer tastes quite good and is aging on bourbon soaked oak cubes.

This is Not a Lambic

Posted on September 14, 2013 by Nick Ladd

This is not a pipe. – Magritte

This is not a Lambic. Many folks would call this beer a ‘pseudo-Lambic’ (pLambic), but I’m not a fan of the term. What is clear, however, is that this is the beginning of a new tradition of wild fermentation for my homebrewery.

Traditionally, Belgian Gueuze is produced by blending portions of 3-, 2-, and 1-year old Lambic. My aim with this project is to create a similar beer, using a similar recipe and methodology, while using cultured microorganisms. With some luck, this beer will become the 3-year-old aged component of a Gueuze-like blend. Of course, there are differences. Foremost, my beer is not fermented spontaneously with microbes resident in my brewery; I live way too close to the Gowanus Canal to do that. Instead, I am relying on a blend of both yeast and lactic acid bacteria produced by Wyeast and then splitting the fermentation into secondary fermenters containing a variety of cultured commercial ‘bugs’.

Aged hops were acquired from Hops Direct and used in the boil. They were quite … cheesy.

Odd looking gray goop leftover in the mash tun, a result of the turbid mash.

For this beer, I am using a very traditional blend of raw unmalted wheat and pilsner malt. I undertook a traditional turbid mash which, in a nutshell, involves pulling liquid from the mash, boiling it, and then returning it to the mash in order to hit specific temperatures. By boiling the thin portion of the mash (as opposed to the thick portion in decoction brewing), you end up denaturing a large portion of enzymes and creating a starch-filled ‘turbid’ wort. All of this is done with the intent of creating a very dextrinous wort providing fuel for the extended fermentation that this beer will undergo.

Recipe

Size: 4.25 gal
Efficiency: 74%
Attenuation: 90% (predicted)

Original Gravity: 1.047 SG
Terminal Gravity: 1.005 SG (predicted)
Color: 3.43 SRM
Alcohol: 5.58% SBV (predicted)
Bitterness: 0.0 IBU

Ingredients:
5 lb (64.5%) Belgian Pils (Castle)
2.5 lb (32.3%) Wheat Raw (Rahr)
4 oz (3.2%) Acidulated Malt (Weyermann)

3.25 oz AGED Cascade (0% AA) – added during boil, boiled 90 m
0.5 ea Whirlfloc Tablets (Irish moss) – added during boil, boiled 15 m
0.5 tsp Wyeast Nutrient – added during boil, boiled 10 m

1 ea WYeast 3278 Belgian Lambic Blend™

Turbid Mash:

113.0 °F – 10m
136.0 °F – 5m
150.0 °F – 30m
162.0 °F – 20m
167.0 °F – 20m
175 °F – 10m

Fermentation:
1. Chill to 70°F and keep at 70°F until activity slows (1 week+).
2. Raise temp to 75°F 3 days

Secondary:
1. Rack to (3) 1-gallon glass jugs
2. Inoculate with (3) different cultures:

a. Cultured Cantillon Rose de Gambrinus
b. Cultured Russian River Beatification
c. Cultured Tilquin Gueuze

Three cultures are being stepped up and added into separate secondary fermenters.